Genicom 3600 - Manual (Page 78)

3600 Printer Maintenance Manual
4-8
Printer Errors (continued)
Error Code Problem Solution
32 Non-immediate command or data
received after buffer full. Allow the printer to empty the buffer contents before
sending commands or data.
33 Invalid field delimiters. Check for all pairs of field delimiters, and make sure both
are numeric or both are alphanumeric.
34 Invalid escape command. Correct the escape command syntax.
35 Invalid data shift command. Correct the shift command syntax.
36 Invalid or undefined format
number. Verify that the format numbers are between 0 and 19.
37 Insufficient room in RAM to print
format. Reduce the number of data fields in the format.
38 Invalid or undefined field number. Verify the field number in the label format.
41 Syntax error for program
commands. Check the program command for proper syntax.
42 Insufficient room in RAM to store
format. Empty the buffer contents. If the format still does not fit,
delete some fields or other data from the format. You may
have to remove or reduce the UDCs, formats, or fonts if
necessary.
Note:
Entering <ESC>m tells the host how much memory is
installed and how much is available.
43 Too many fields in label format. You can use up to 200 fields in a format and each field can
use up to 250 characters. Reduce field size or delete some
fields.
46 Undefined statement. Check the statement syntax.
52 Invalid UDC/UDF bitmap cell
height/width or intercharacter
space. Verify that cell heights and widths are between 1 and 599,
and that the intercharacter space is between 0 and 199.
53 Insufficient room in RAM to store
UDC or UDF. Remove or reduce formats, fonts, or UDCs.
54 Invalid UDC command syntax. Correct the UDC command syntax.