Genicom 3600 - Manual (Page 60)

3600 Printer Maintenance Manual
c 3 9 c 3 9 frank
3-16
Adjusting the Printhead Adjustment Lever for Print Quality
The printhead adjustment lever is located at the end of the printhead pivot
bracket. It allows fine-tuning of the printhead fore/aft position. The printhead
adjustment lever provides three stops forward movement of the printhead and
three stops backward movement from center position in 0.006-inch increments.
To achieve the best print quality, raise the printhead with the printhead lift
lever and position the printhead adjustment lever as shown in the illustration:
from the rear, adjust clockwise/left to move the printhead forward, or adjust
counterclockwise/right to move the printhead backward.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
3600M.033
O
I
moves printhead
backward
Printhead
adjustment
lever
moves printhead
forward