Genicom 3600 - Manual (Page 37)

Preventive Maintenance
2-5
2
Removing the Media Cover
Most of the cleaning procedures require that you remove the media cover.
To remove the media cover
1. Place your fingers in the space at the lower center edge of the media cover
and pull the bottom of the cover away from the base of the printer.
2. Grasp the front of the media cover and lift the front of the cover upward.
3600M.010
Media
cover
Power
Intermec Intermec
3600
Alert
Feed/Pause
Empty/Pause
Media cover
release
(between the two
notches)
1
3
2
3. Lift the media cover away from the printer.