Genicom 3600 User Manual
Page 39
Advertising
Preventive Maintenance
2-7
2
3. Remove the media from the paper path and the ribbon (if installed) from
the TTR supply and takeup hubs.
4. Use a cotton swab moistened with alcohol to remove any dirt, adhesive, or
debris from the print surface on the bottom of the printhead.
Power
Intermec
3600
Alert
Feed/Pause
Empty/Pause
Thermal
printhead
3600M.012
5. Wait 5 to 10 seconds for the print surface to dry. Reload the media (and
ribbon if used).
6. Engage the printhead by rotating the head lift lever counterclockwise until
it locks in place.
7. If you are finished cleaning, install the media cover.
Advertising