IBM RS/6000 - Manual (Page 192)

Select the standalone machine object type.
In our example, the following screen appears:
Primary Network
Move cursor to desired item and press Enter.
Network1 networks tok
Network3 networks ent
F1=Help F2=Refresh F3=Cancel
F8=Image F1 =Exit Enter=Do
/=Find n=Find Next
The network to be selected here is the network to which the NIM Client's primary
interface connects; in our case, we must select Network3. The following SMIT
screen will be displayed. The information used in our example is shown in bold
type.
Define a Machine Object
Type or select values in entry fields.or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
ᑍ Machine Object Name [Standalone1]
Hardware Platform Type rspc
Machine Object Type standalone
Primary Network Install Interface
Network Object Name network3
ᑍ Host Name [Standalone1]
Network Adapter Hardware Address [ 8 5ac231b9]
Network Adaptor Logical Device Name []
ᑍ Cable type [bnc] #
IPL ROM Emulation Device []
CPU Id [] #
Comments []
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F1 =Exit Enter=Do
Figure 49. Machine Object Definition Menu
Check the object entry with the following command:
lsnim -l MachineObjectName
168 Introduction to PCI-Based RS/6000 Servers