To change the tray selection -7 – Konica Minolta BIZHUB PRO bizhubPRO920 User Manual
Page 119
Advertising
Troubleshooting
5
bizhub PRO 920
5-7
Tr
oub
lesho
o
ti
ng
Ch
apt
er
5
Follow the procedure below to change the tray selection for the current job,
or supply the empty tray with copy paper.
To change the tray selection
1
Touch [No Paper].
The Machine Status Screen will be displayed.
2
Touch [Details].
The tray selection will be available on the Machine Status Screen.
3
Touch the desired tray key, then touch [OK].
The Machine Status Screen will be restored.
Advertising
This manual is related to the following products: