Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 389)

Advanced Information 14
bizhub PRO 920 14-13
Ad
va
nc
ed
In
fo
rm
a
tio
n
Ch
ap
te
r 14
8
Touch [OK].
The Mode Memory Screen will be restored. Check that the job name
has been correctly entered.
If you do not wish to enter a name, simply touch [OK]. The key displays
16 asterisks (*) in place of a name.
9
Touch [OK] to complete the setting and return to the Basic Screen.
? Do you want to cancel this operation?
% Touch [Cancel].
Recalling Stored Job Settings
Follow the procedure below to recall jobs that are already stored.
To recall stored job settings
0 Check Screen allows you to view the stored settings before recalling.
0 The Mode Memory Screen can be displayed only from the Basic Screen.
If any other screen such as Machine Status Screen is displayed, pressing
[Mode Memory] will be ignored.
0 The recalled settings can be altered on the screen.
1
Display the Basic Screen, then press [Mode Memory] on the control
panel.
The Mode Memory Screen will be displayed.
2
Touch a job key to select a job you want to recall.
– The job keys numbered from 01 to 10 are displayed on the screen.