Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 175)

Basic Job Settings 9
bizhub PRO 920 9-7
Basic Job Set
tings
Ch
ap
te
r 9
!
Detail
Image Density Selection changes the range of the density level between
the darkest and lightest, so that users can obtain the optimum print result
according to the originals or print object without degrading image quality.
This setting can be made by the administrator, and will also be applied to
Density Shift for Enhance Mode. (Utility Screen>2 Function Setting>3
Density Setting>4 Image Density Selection) For details, see page 3-36 of
POD Administrator’s reference.
Photo Mode Density Setting specifies the exposure level to be selected
by AES in Photo mode.
This setting can be made by the administrator. (Utility Screen>2 Function
Setting>3 Density Setting>3 Photo Mode Density Setting) For details, see
page 3-35 of POD Administrator’s reference.
To adjust exposure level and background whiteness
1
Touch [Density] on the Basic Screen.
The Density/Background adjustment menu will be displayed.
2
Touch [Darker] to darken, or [Lighter] to lighten the copy image.
– Highlight the desired exposure level indicator.
– Touch [Std.] to select the middle density level.
– When resuming AES, touch [Auto].
– To use preset density, touch [Pre 1] or [Pre 2].