Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 202)

9 Basic Job Settings
9-34 bizhub PRO 920
Basic Job Set
tings
Ch
ap
te
r 9
8
When all originals are scanned, touch [Complete Scan] to exit the Sep-
arate Scan mode.
9
Press [Start] to print.
All the data in memory will be output.
2
Reminder
DO NOT press [Reset] with the original already set on the original glass
and duplex copy mode selected, otherwise the Separate Scan mode will
be released to disable the copier from scanning the original placed on the
original glass.
!
Detail
For the information on unsuitable ADF originals, see page 3-10.