Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 149)

Before Making Copies 8
bizhub PRO 920 8-3
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 8
• Single Feed
Sets the ADF to accept thick originals or paste-ups to be fed one sheet at a
time.
• Custom Size for Original
Identifies the special original size which the machine cannot detect, in order
to select the optimal paper size for copying or printing.
• Tab Paper
Copies onto tabbed sheets from tabbed originals, allowing the image on the
tab part of the original to be printed on the same part of the tabbed copy pa-
per.
Original Image Type
• Original Image Type
Enhances photo image in Photo mode, regular image in Text/Photo mode,
text image in Text mode, lighter image in Dot Matrix mode.
Applications
• Insert Sheet
Insert up to 30 blank or copied sheets from any tray, or inserts blank or cop-
ied front and back covers from any tray to enhance the presentation of multi-
page documents.
• Chapters
Starts chapter pages on the right side (front pages) of the finished document.
Only duplex mode (1-2) is compatible with this feature.
• Insert Image
Stores pages in memory from the original glass, and inserts the pages into a
document copied from the document feeder.
• OHP Interleave
Copies onto OHP transparencies and interleave blank or copied paper for
each original copied.
• Program Job
Scans documents into memory while designating different copy conditions
for each original, then prints all the documents collectively.
• Book Copy
Copies both pages of an open book or book-size sheet separately onto two
sheets in 1-1 mode or separately onto each side of one sheet in 1-2 mode.
You can use the Book Copy mode with the Front or Front/Back cover mode.
The cover page(s) will be scanned and copied normally before image division
is performed on the other pages.