Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 253)

Applications 11
bizhub PRO 920 11-19
Applications
Chap
te
r 11
4
Use the control panel keypad to enter the page number.
For example, if insertion locations are “2/2/6”, scanned images will be
inserted as follows:
The first scanned image will be inserted after page 2.
The second scanned image will be inserted directly after the first
scanned image insertion.
The third scanned image will be inserted after page 6.
– Touch [Set] after each entry to move to the next key.
– To set more than 12 locations, touch the arrow key to move to the
next page.
– To clear an incorrect entry, touch [Del]. The entered number will be
deleted.
? Do you want to cancel changes to the settings?
% Touch [Cancel].
? Do you want to cancel the Insert Image function?
% Touch [Off].
5
When all page number entries are made, touch [OK] repeatedly till the
Application Screen is restored.
6
Touch [Basic] to restore the Basic Screen.
The [Separate Scan] key on the Basic Screen appears highlighted to
show that the Separate Scan mode is automatically selected.
7
Enter the desired print quantity from the control panel keypad.
8
Scan the document feeder images.
– Position originals FACE UP in the document feeder.
If the number of originals exceeds 100, divide them into blocks not
exceeding 100 sheets and load them from the block with the first
page.