Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 183)

Basic Job Settings 9
bizhub PRO 920 9-15
Basic Job Set
tings
Ch
ap
te
r 9
Copying Using Special Paper (Bypass Tray Setting)
Use the Multi-sheet bypass tray to copy using the special paper type or size.
The following settings are provided:
-
Paper type: - (blank), Normal, Thick, Thin Paper, OHP Paper, Trace, User
- Original Size Detection: Sets the machine to detect a specific paper size
instead of the size normally to be detected; namely, A5 instead of
5.5"×8.5", A4R instead of 8.5"×11"R, 8"Ч13"/8.12"Ч13.2"/8.25"Ч13"/
8.5"Ч13" instead of 8.5"×14", and A5R/B6R instead of 5.5"×8.5"R.
- Paper size: Standard, Custom, Wide Paper, Tab Paper
!
Detail
Special paper can also be loaded in the main body tray or in the LCU to
use on a regular basis. See page 1-2 of POD Administrator’s reference.
For specifications of special paper to be loaded in the Multi-sheet bypass
tray, see page 3-9.
For details on loading paper in the Multi-sheet bypass tray, see page 4-6.
2
Reminder
When setting wide size, be sure to specify the precise dimensions of pa-
per to be used. The dimensions of the wide size selected on the Wide
Size Paper Screen are not correctly set in the initial setting.