Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 365)

Finishing / Paper Fold 12
bizhub PRO 920 12-39
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
Troubleshooting
Copying with the Distribution recovery mode:
The Distribution recovery mode enables you to complete your copying job
even when trouble occurs in either the master or tandem machine, such as
a paper jam. In that case, the copier that is trouble free completes the job.
!
Detail
This function can be deactivated in Tandem Setting of Utility mode. See
POD Administrator’s reference for details.
When a paper jam, SC-code (E-code, F-code) trouble or unloaded paper
occurs on either the master or tandem machine:
The machine that is trouble free handles the remaining print quantity and
completes the job.
When the job is completed, take the appropriate troubleshooting measures
to correct the problem.
When memory overflow occurs on either the master or tandem ma-
chine:
On the master machine:
The scanning job will stop immediately, and the tandem copying job will be
suspended on both copiers. At this time, the tandem mode is not released.
Take the same measure to be applied for single copier referring to p. 5-10.
On the tandem machine:
The tandem machine will start the tandem copying job when the memory be-
comes available after completing some reserve jobs. In this case, the Distri-
bution recovery mode functions to continue the tandem printing job on the
master machine until the tandem machine becomes available for the job.
If the memory of the tandem machine does not become available despite the
elapse of time, the tandem mode will be released on the tandem machine,
and the Distribution recovery mode functions to complete the job on the
master machine.
When the power is turned off on either the master or tandem machine:
The tandem mode will be released automatically in either case. Restart the
procedure from the first step.