Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 391)

Advanced Information 14
bizhub PRO 920 14-15
Ad
va
nc
ed
In
fo
rm
a
tio
n
Ch
ap
te
r 14
Recalling Previous Job Settings
Follow the procedure below to copy with a previous job settings.
To recall previous job settings
0 Only the last-completed output job settings can be recalled as the previ-
ous job settings. Non-completed job or reserve job settings cannot be re-
called, even if the setting operations have been made last.
0 The previous job settings can be recalled even after the machine power
is turned off then on.
1
Press [Mode Memory] on the control panel.
The Mode Memory Screen will be displayed.
2
Touch [Pre-Job Recall].
The [Job Check] key will appear on the screen.
3
Touch [Job Check] to review the settings.
The Check Screen will be displayed.