Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 72)

3 Paper and Original Information
3-8 bizhub PRO 920
Pap
e
r
a
nd Or
igin
al I
n
fo
rm
at
ion
Ch
ap
te
r 3
2
Reminder
Be sure to use paper only of the size specified for the tray, especially
when specified as one of the sizes in Original Size Detection, Custom, or
Wide Paper.
2
Note
If any size other than A4 (LU-403)/ A3 (LU-404) is desired, contact your
service representative.
Detailed information of paper sizes are:
F4: 8"Ч13" (203 Ч 330 mm)
A3: 11.69"Ч16.54" (297 Ч 420 mm)
B4: 10.12"Ч14.33" (257 Ч 364 mm)
A4: 8.27"Ч11.69" (210 Ч 297 mm)
B5: 7.17"Ч10.11" (182 Ч 257 mm)
A5: 5.85"Ч8.27" (148 Ч 210 mm)
!
Detail
When setting wide size to the Multi-sheet bypass tray, be sure to specify
the precise dimensions of paper to be used. See page 9-15 for details.
Post inserter PI-501 Max. 12.36”Ч18.11” (314 Ч 460 mm) ~ A5
• Upper tray detection size: 8.5”Ч11”, 8.5”Ч11”R,
5.5”×8.5”, A4, B5, B5R
Detects A5 instead of 5.5”×8.5”, A4R instead of
8.5”×11”R
• Lower tray detection size: 11”Ч17”, 8.5”Ч14”, 8.5”Ч11”,
8.5”Ч11”R, 5.5”×8.5”, A3, B4, A4, B5, B5R
Detects A5 instead of 5.5”×8.5”, A4R instead of
8.5”×11”R, and 8”Ч13”/8.12”Ч13.2”/8.25”Ч13”/
8.5”Ч13” instead of 8.5”×14.
Z folding unit ZU-602 Punch mode: 11”Ч17”, 8.5”Ч11”
Z-fold mode: 11”×17” (z-fold), 8.5”×11” (double-fold)
All other paper sizes will be output without z-fold/double-
fold.
Trimmer unit TU-501 11”Ч17”, 8.5”Ч14”, 8.5”Ч11”R, A4R and those wide sizes
Equipment Available sizes