Konica Minolta BIZHUB PRO bizhubPRO920 User Manual
Page 192
9
Basic Job Settings
9-24
bizhub PRO 920
Basic Job Set
tings
Ch
ap
te
r 9
Changing Magnification Ratio
The following six modes are provided:
-
Enlarge/Reduce: Select from the eight ratios (0.500, 0.647, 0.772, 0.939,
1.214, 1.294, 1.545, 2.000) provided on the screen.
-
XY Zoom (proportional): Specify 0.250 to 4.000 in 0.001 (0.1%) incre-
ments
-
XY Zoom (Individual): Vertical and horizontal dimensions can be specified
individually from 0.250 to 4.000 in 0.001 (0.1%) increments.
-
Preset Zoom: Select from the three ratios previously programmed.
-
Minimal: Set reduction ratio slightly smaller than full size (0.930) in order
to prevent image loss when copying original image that reaches the page
margin.
-
Auto Zoom: Automatically set appropriate magnification ratio according
to the original size and selected paper size.
!
Detail
The preset zoom ratio setting is described in POD Administrator’s refer-
ence (3 Function Setting>4 Preset Zoom). See page 3-38.
To set zoom mode
1
Touch [Zoom] on the Basic Screen.
The Zoom setting menu will be displayed.