Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 178)

9 Basic Job Settings
9-10 bizhub PRO 920
Basic Job Set
tings
Ch
ap
te
r 9
To Select Paper Size Automatically (Auto Paper Select)
Auto Paper Select detects the original size placed on the ADF or original
glass and automatically selects and feeds copy paper of the same size, or
selects an appropriate size according to the magnification ratio selected.
2
Note
If “Auto Paper Select” appears on the [Paper] key of the Basic Screen,
the function is already activated. You can start copying without perform-
ing the following procedure.
!
Detail
The original sizes to be detected from the ADF or original glass are pre-
viously determined. See page 3-10 for details.
The original sizes to be detected from the ADF or original glass can be
changed by the administrator. See page 4-50 of POD Administrator’s ref-
erence.
The administrator can designate the tray or paper condition incompatible
with Auto Paper Select. See page 1-2 of POD Administrator’s reference.
The administrator can deactivate Auto Paper Select when original is set
in the ADF or on the original glass. See page 3-23 of POD Administrator’s
reference.
To set Auto Paper Select
0 Auto Paper Select is incompatible with Auto Zoom, however, Rotation is
available.
0 Auto Paper Select will not select the tray of the size specified as non-
standard or wide size.
1
Touch [Paper] on the Basic Screen.
The Paper setting menu will be displayed.