Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 316)

11 Applications
11-82 bizhub PRO 920
Applications
Chap
te
r 11
4
Select the desired Annotation type, then specify its printing position.
– Touch [Next] or [Back] to display the desired Annotation setting key
on the screen, then touch to highlight it. Up to 40 setting keys are
available on the screen.
The setting registered on that key will be recalled and on the
screen.
– To change the printing position, touch [Printing Position] to display
the Printing Position Screen.
Touch the desired printing position in the printing position area. If
fine adjustment is needed, touch [Fine Adjustment] to display the
Fine Adjustment Screen. See page 11-74 for details.
– If [Temp. No. Set] key appears on the screen, the annotation
number setting has been changed temporarily. See the next step.
5
To change the annotation number setting temporarily, touch [Temp.
No. Set].
The Temporary Number Setting Screen will be displayed.
– Touch the alphanumerical screen keys to enter the desired number
or word. Up to 12 alphanumerical characters can be entered.
With this setting specified, the entered number or word will be print-
ed on all pages and the annotation number will not be counted in
the former setting.