Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 281)

Applications 11
bizhub PRO 920 11-47
Applications
Chap
te
r 11
4
Select the page to be adjusted with image position.
– Touch [Front] or [Back] to specify the shift direction and amount in-
dividually; or touch [2-Sided] to specify collectively. The [Back] and
[2-Sided] keys function only for duplex copying.
5
Specify the shift direction and amount.
– Touch and highlight the desired shift direction key on the left side
of touch panel keypad, then use keypad or up/down arrow key to
enter the desired shift amount, from 0 to 250 mm in 1 mm incre-
ments.
The image display on the screen allows you to view the shift direc-
tion and amount to be created on the printed sheets.
– If Booklet Pagination or 2 Repeat mode of Image Repeat has been
already selected, the [Page Interval] key appears clear on the
screen to show its availability.
If desired, touch [Page Interval] to highlight it, then enter the desired
amount using the touch panel keypad or up/down arrow key.
– If Booklet Pagination (except Adhesive Binding mode) has been al-
ready selected, the [Creep] key appears clear to show its availabil-
ity. Touch [Creep] to highlight it, then enter the desired offset
amount from 0 to 50 mm in 1 mm increments.
6
Touch [OK].
The Application Screen will be restored.
? Do you want to cancel changes to the settings?
% Touch [Cancel].
? Do you want to cancel the Page Margin function?
% Touch [Off].