Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 382)

14 Advanced Information
14-6 bizhub PRO 920
Ad
va
nc
ed
In
fo
rm
a
tio
n
Ch
ap
te
r 14
4
Change the settings from the Check Screen.
– Touch the desired key (Basic/ Combine Originals/ Finishing/ Paper
Fold/ Org. Image Type/ each application function) on the Check
Screen to highlight it, then touch [Change]. The touch panel will dis-
play an appropriate screen to change the copying condition select-
ed.
– Change the setting as desired, then press [Check] to restore the
Check Screen to return to the checking steps.
– If making a set or sample copy, proceed to step 6.
– To start printing without proofcopying, proceed to step 8.
5
Release application functions.
– Touch the desired application function key on the Check Screen to
highlight it, then touch [Clear]. The confirmation screen will appear
on the Check Screen.
– Touch [Yes] to cancel the function, or [No] to restore.
– If making a set or sample copy, proceed to the next step.
– To start printing without proofcopying, proceed to step 8.