Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 362)

12 Finishing / Paper Fold
12-36 bizhub PRO 920
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
2
Note
Tandem mode and Power Save functions:
If the tandem mode is selected while the tandem machine is in Auto low
power mode, the power saving mode will be released automatically.
The tandem mode will not be selected when the tandem machine is
turned off by Auto shut-off. Release the Auto shut-off mode by pressing
[Power Save].
If Auto low power is activated on the tandem machine during the tandem
job setting, the power saving mode will be released automatically when
printing job starts.
If Auto shut-off is activated on the tandem machine during the tandem
job setting, the tandem mode will be released automatically.
Selected tandem mode will be released automatically when the master
machine activates Auto low power/Auto shut-off.
Press [Power Save] to release Auto shut-off if required, then select the
tandem mode again to restart the procedure.
2
Reminder
The tandem mode cannot be selected/continued in the cases shown be-
low. The message “Please wait/ Reserve is not available in Tandem ma-
chine,” “Tandem machine error/ Please check tandem machine,” or
“Please check tandem machine” will be displayed, as required.
The tandem mode cannot be selected while the tandem machine is in
the off state, due to Auto shut-off. Press [Power Save] to release it.
Selected tandem mode will be released automatically when the tan-
dem machine activates Auto shut-off. Press [Power Save] to release
it, then select the tandem mode again to restart the procedure.
When any problem occurs in the tandem machine, such as a paper
misfeed or lack of paper, the tandem machine will be unavailable for
printing; however, the problem will not cause tandem mode to be re-
leased. Take the appropriate troubleshooting measures to be ready
for copying.
Tandem printing job cannot be started if 100 reserve jobs (not in tan-
dem mode) are entered on the tandem machine. Wait until the reserve
jobs are completed on the tandem machine.