Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 46)

2 Preparation for Use
2-14 bizhub PRO 920
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 2
Finisher FS-604 (+ Punch Kit PK-505)
2
Reminder
The Primary (Main) tray gradually goes down while printed materials out-
put. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
1
2
3
4
5
6
Finisher FS-604
No. Name Description
1 Finisher door Opens to the internal finisher to allow replenishing
staples and clearing mishandled paper, and also to
allow removal of waste paper punched out when
Punch kit PK-505 is installed.
2 Folding mode outlet Delivers sets output in Half Fold, Fold&Staple, Let-
ter Fold In, or Letter Fold Out mode.
3 Folding mode tray Holds sets output in Half Fold, Fold&Staple, Letter
Fold In, or Letter Fold Out mode.
4 Exit paper guide Used to hold paper to prevent it from being curled
excessively. Normally stored in the guide holder on
the back of the finisher.
5 Primary (main) tray Holds sets output in the selected finishing mode
other than specified above.
6 Secondary (sub) tray Holds sets output in Sort, Group, Face Up, or Face
Down mode.