Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 272)

11 Applications
11-38 bizhub PRO 920
Applications
Chap
te
r 11
5
Select the desired Repeat mode, then touch [OK].
– Touch [2], [4], or [8] to select the desired Repeat mode.
– If you want the image upside down on the other side in 2 Repeat
mode, touch [R-Reverse] or [L-Reverse].
6
Touch [OK] on the Image Repeat Screen.
? Do you want to cancel changes to the settings?
% Touch [Cancel].
? Do you want to cancel the Image Repeat function?
% Touch [Off].
7
Touch [OK] to restore the Application Screen.
8
Touch [Basic] to restore the Basic Screen, then select the desired mag-
nification and paper size.
9
Enter the desired print quantity from the control panel keypad.
10
Position original.
– For Size Auto Detect mode original, open the document feeder,
then position the original FACE DOWN on the original glass. In this
case, DO NOT close the document feeder.
– For 2 Repeat, 4 Repeat, or 8 Repeat mode original, ADF is also
available.
11
Press [Start].
!
Detail
The Size Auto Detect mode may not operate properly if the lighting in the
work place is directly over the original glass. In this case, consult your
service representative about an appropriate place for installation.