Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 350)

12 Finishing / Paper Fold
12-24 bizhub PRO 920
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
1
Touch [Finishing] on the Basic Screen.
The Finishing setting menu will be displayed.
2
Touch [2-Hole] or [3-Hole] to highlight it.
The punch position currently selected will be displayed on the left side
of the screen.
3
Change the punch position, if desired.
– To change the punch position, touch [Pos. Set] to display the pop-
up menu, then select the desired punch position.