Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 376)

13 Job Management
13-10 bizhub PRO 920
Jo
b Ma
nag
eme
n
t
Ch
ap
te
r 13
To Check/Control Spool Jobs
Use this function to display spool jobs as a list.
The list includes following information.
-
No.: Consecutive numbers of both copy and print jobs
- Mode: Wait for RIP or Receiving (current status of the spool job)
Follow the procedure below to change the output order or delete the spool
jobs.
Job operation for spool jobs
1
Touch [Spool] on the Job List Screen.
– Check the status of the spool jobs.
– Touch the lower arrow key to scroll, if 6 or more jobs are entered.
2
Select the desired job, then select the job operation.
– To clear spool job:
Touch to highlight the desired job key, then touch [Delete].
Touch [Yes] on the popup menu to clear the selected job. All the
data of the selected job will be cleared.
– To specify the next job to be printed:
Touch to highlight the desired job key, then touch [Increase Priori-
ty]. The highlighted job will be moved just under the current print
job.
This will not function if printing operation has already been started
for the selected job.
– To change the order of jobs:
Touch to highlight the desired job key, then touch [Priority]. The
highlighted job will be advanced by one in printing order unless the
job preceding the selected one is already in progress.
If printing order cannot be changed for the selected job, a message
will be displayed for information.