Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 347)

Finishing / Paper Fold 12
bizhub PRO 920 12-21
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
12.7 Output Z-Folded Copies (Z-Fold)
The Finisher FS-509/FS-516/FS-604 with Z folding unit ZU-602 installed can
zigzag fold A3 or B4 copy paper upon exit.
This mode is available in combination with Punch or Staple mode.
To make Z-folded copies
0 Number of folded sheet: 1 sheet
0 Paper size: 11”Ч17”, 8.5”Ч14”, A3, B4
0 Paper weight: 16 to 24 lb
0 Fold type: Z-fold (double-fold 8.5”×14” only)
0 Fold position (width from the edge to the first fold):
11”×17”: 8.46” (215 mm) or less
8.5”×14”: 10.30” (261.6 mm) or less
A3: 8.23” (209 mm) or less
B4: 7.13” (181 mm) or less
0 Z-Fold and Staple modes are available in combination for A3 and A4
mixed, while they cannot be used for B4 and B5 mixed.
0 When using Mixed Original mode with Z-Fold mode, different types (e.g.
A3 and B4) should not be mixed, otherwise the Z-Fold mode may not
function properly.
0 Some plain paper types may cause fold line to shift.
0 Copy paper cannot be fed from trays specified as Thick 2, OHP, or Trac-
ing in paper type, or specified as any size other than Standard. (Unavail-
able for the sizes in Original Size Detection, Custom, Wide Size or Tab
Paper)
Z-Fold
Z-Fold + Staple + Mixed Original
Z-Fold + Punch