Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 188)

9 Basic Job Settings
9-20 bizhub PRO 920
Basic Job Set
tings
Ch
ap
te
r 9
Similarly, touch [Y] to highlight it, then enter the desired vertical
size. Entered size should fall within the range from the vertical size
of the standard size corresponding to the selected wide size, to a
maximum of 314 mm.
When all settings are completed, touch [OK] to return to the Change
Bypass Tray Setting Screen.
– To specify a tabbed paper size:
Touch [Tab Paper] to display the Tab Paper Setting Screen, then
touch the desired tabbed paper size to highlight it.
Touch [Number of Tabs], then use the control panel keypad to enter
the number of tabs. Setting range is from 1 to 15.
If setting the custom tabbed paper size, touch [Input Size] to dis-
play the Size Setting Screen.