Konica Minolta BIZHUB PRO bizhubPRO920 User Manual
Page 385
Advertising
Advanced Information
14
bizhub PRO 920
14-9
Ad
va
nc
ed
In
fo
rm
a
tio
n
Ch
ap
te
r 14
2
Set copy conditions, as desired.
–
All copy conditions except Reserve mode can be specified.
3
Position original(s), then press [Start] to start the interrupt copying.
4
When Interrupt copying is completed, press [Interrupt] again.
The [Interrupt] LED turns out and the Machine Status Screen will be
displayed.
5
Press [Start] to resume copying.
2
Note
To check settings for the previous job before restarting, touch [Close] on
the Machine Status Screen to display the Basic Screen.
Check the settings, then press [Start] to resume copying.
Advertising
This manual is related to the following products: