Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 116)

5 Troubleshooting
5-4 bizhub PRO 920
Tr
oub
lesho
o
ti
ng
Ch
apt
er
5
5.2 Clearing Mishandled Paper
When a paper misfeed occurs, the machine stops making copies and the
Jam Position Screen displays to indicate misfeed area(s).
The Start LED turns orange on the control panel, and copying operation can-
not be continued until all the misfeed locations are cleared.
All the misfeed locations will be indicated by flashing/lighting numbers and
arrows on this screen. Flashing number and arrow indicate the jammed po-
sition of the highest priority.
Action to remove mishandled paper is displayed in the message area, and
touching [Illustration] will display subsequent screens for the disposal action.
Follow the procedure below to remove mishandled paper.
2
Reminder
Before performing the clearing procedure, see page 1-11 for the caution
label locations inside the machine.
To remove mishandled paper
1
Touch [Illustration] on the screen.
The screen illustrating the method for the disposal action will be dis-
played.