Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 191)

Basic Job Settings 9
bizhub PRO 920 9-23
Basic Job Set
tings
Ch
ap
te
r 9
9.4 Zoom
In the initial settings on the Basic Screen, the magnification is automatically
set at “×1.000” (full size).
This section describes how to change the magnification ratio.
!
Detail
The initial settings may be altered by the administrator. Details are re-
ferred in POD Administrator’s reference. See page 3-49.
Copying in Full Size Mode
Follow this procedure to make a 100% copy of the original image, irrespec-
tive of the selected paper size.
1
Close the ADF securely, then press [Reset].
The initial settings are restored. Check that “×1.000” is displayed on
the [Zoom] key to indicate that the full size mode is selected.
2
Select additional copy conditions, as desired.
Specifying paper size will release 1.000 magnification and set Auto
Zoom automatically. In this case, touch [Zoom] on the Basic Screen to
display the Zoom setting menu, then touch [×1.0] to highlight it.
? Do you want to start copying immediately?
% You don’t have to touch [OK] to restore the Basic Screen. Position
original(s) directly, then press [Start].