Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 197)

Basic Job Settings 9
bizhub PRO 920 9-29
Basic Job Set
tings
Ch
ap
te
r 9
9.5 Simplex/Duplex
The Basic Screen is initially set to 1-1 copy mode to make single-sided cop-
ies from single-sided originals.
Follow the procedure below to make double-sided copies from the originals
scanned from the document feeder or from the original glass, and also to
make single-sided copies from double-sided originals.
!
Detail
The machine is set to match the original binding direction and copy bind-
ing direction automatically. For details, see page 3-55 of POD Adminis-
trator’s reference.
If copy result is not as expected, this setting might be altered by the ad-
ministrator. In this case, specify the copy binding direction manually. See
page 12-6 for details.
Making Double-Sided Copies Using ADF
Select the copy mode according to the original type (single-sided or double-
sided).
0 Position originals according to the original direction icon on the Basic
Screen.
0 The normal double-sided copies (having the same edge as page top) can
be made from double-sided originals printed upside down on the back
pages.
2-2 Copying
1-2 Copying