Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 248)

11 Applications
11-14 bizhub PRO 920
Applications
Chap
te
r 11
11.4 Locating Title Pages on the Front Side (Chapters)
This function is used with ADF in 1-2 mode for the purpose of locating title
pages on the front side, rather than reverse side, of a duplex copy to improve
the presentation of double-sided copies.
To effectively locate the title page on the front, a blank page will be automat-
ically created on the reverse side of a sheet, if required.
2
Note
Touch [Booklet Pagination] on the Chapters Screen to use this function
together with Chapters.
Use Stamp together with this function to print chapter number onto
chapter page in addition to page number.
To set Chapters function
0 Use ADF to scan originals.
0 Max. title pages: 30 locations
0 Entering “0” or the same page number twice will be ignored on the
screen.
0 Chapter insertions occur in sequence even if original page numbers are
entered out of sequence.
0 The chapter page can be copied on the sheet from another tray source.
(Print Insertion)
Single-sided originals
Title pages Title pages
Copies in Chapters mode