Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 293)

Applications 11
bizhub PRO 920 11-59
Applications
Chap
te
r 11
11.17 Copying Image in the Center of Copy Paper (Image
Centering)
Use this function to detect the image area of the original and center the
whole image on the copy paper making it easy to copy small pieces of paper.
2
Note
This function may not operate properly if the lighting in the work place is
directly over the original glass. In this case, consult your service repre-
sentative about an appropriate place for installation.
To set Image Centering function
0 Non-Image Area Erase is automatically selected. Release it manually
when using ADF to scan originals.
0 When using Book Copy with this function, the original smaller than the
selected paper size will be printed in the center of the copy paper without
image division performed.
0 Auto Zoom and Auto Paper Select are automatically released, and 1.000
(100 %) is selected as a magnification ratio.
0 Copy mode is automatically set to 1-1. When selecting 1-2 mode, Sepa-
rate Scan mode will function automatically.
Image Centering