Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 352)

12 Finishing / Paper Fold
12-26 bizhub PRO 920
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
12.9 Cover Sheet Feeding (Post Inserter)
The Finisher FS-509/FS-516/FS-604 with Post inserter PI-501 installed can
attach cover sheets to output copies.
Using Insert Sheet function, cover sheets loaded in the upper and lower trays
of the post inserter will be attached as a front cover and/or back cover or in-
sertion sheet to output copies, and also using Staple mode, a covered and
stapled book can be made.
Or, using Cover with Blank Sheet mode of Booklet Pagination and Half Fold/
Fold&Staple with Trimming mode, a booklet-type cover will be attached to
the multiple page signature booklets.
To attach cover sheet to copies
0 Paper size: Upper tray 8.5”Ч11”, 8.5”Ч11”R, 5.5”×8.5”, A4, A4R, B5,
B5R, A5
Lower tray 11”Ч17”, 8.5”Ч14”, 8.5”Ч11”, 8.5”Ч11”R, 5.5”×8.5”, A3, B4,
A4, A4R, B5, B5R, A5
0 Upper/Lower tray capacity: 200 sheets (110 lb paper) or within 30 mm
thick each
0 Use ADF.
0 The cover paper size should be the same as copy paper size.
0 Cover paper loaded in the post inserter cannot be copied.
Cover sheet
Copied set with
cover and inter
Copied set with
cover attached in
staple mode
sheet attached