Lanier AP206 - Manual (Page 102)

Menu Settings
89
5
❖ ❖ ❖ ❖ 9.Duplex Print
You can select whether to use duplex printing or not.
• Off
• On
❖ ❖ ❖ ❖ A.Duplex Bind
You can select the binding position of duplex prints.
• Long Edge
• Short Edge
❖ ❖ ❖ ❖ C.Job Timeout
You can set how many seconds the printer waits before terminating a print
job when the printer does not receive the end of the current print job. The job
is automatically cancelled if time runs out.
• 000 Off
• 1 to 999 seconds by 1
❖ ❖ ❖ ❖ D.I/O Timeout
You can set how many seconds the printer waits for more print data before
ending its wait period and terminating a job. The job is automatically can-
celled if no data is received for the selected time.
• 000 Off
• 1 to 999 seconds by 1 (300 seconds)
❖ ❖ ❖ ❖ E.Feed Timeout
You can set how many seconds the printer waits for the correct paper size
loaded, when paper runs out while printing. The job is printed with the paper
currently loaded if the correct size is not loaded within the selected time.
• 000 Off
• 1 to 999 seconds by 1 (60 seconds)
❖ ❖ ❖ ❖ F.Print Errors
You can select if an error report will be printed from the current tray when a
PostScript error occurs while printing.
• Off
No error report is printed when an error occurs.
• On
An error report is printed when an error occurs. Some of the VM area is
used when this feature is on.
❖ ❖ ❖ ❖ G.KTalk Mode
This setting is not available.