Lanier AP206 - Manual (Page 88)

Replacing Consumables
75
4
F
Stuff some clean, wadded paper
towels into the space where the
oil bottle was installed so that any
residual oil is absorbed.
G
Close the top cover.
Replacing the Waste Toner
Bottle
Replace the waste toner bottle when-
ever the following messages appear
on the panel display.
IPDL-C
Waste T Full
Waste Toner is
Full
R WARNING:
R CAUTION:
Important
❒ Waste toner bottles are consum-
able items and cannot be reused.
We recommend that you purchase
extra waste toner bottles and keep
them on hand for replacement
when necessary.
Note
❒ Before removing the waste toner
bottle from the printer, spread pa-
per or some other material around
the area you are working to keep
the toner from making the floor
dirty.
A
Turn off the printer's power
switch.
B
Open the front cover by pulling
the front cover open lever.
• Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
• Disposal can take place at our
authorized dealer or at appro-
priate collection sites.
• If you dispose of the used ton-
er containers yourself, dis-
pose of them according to
your local regulations.
ZDHH230E
• When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
• Do not open the front cover
when the paper tray is pulled out
halfway. If you do, it might cause
a personal injury.
ZDGH160J