Lanier AP206 - Manual (Page 25)

Setting Up the Printer Driver and Canceling a Print Job
12
1
Macintosh - Setting Up for Printing
Making paper settings from an application
A
Open the file you want to print.
B
On the [File] menu, click [Page Setup].
[LaserWriter 8 Page Setup]
appears.
C
Confirm that the printer you want to use is shown in the [Format for:] box.
Note
❒ If the printer is now shown in the [Format for:] box, use the pop-up menu to
display a list of available printers.
Reference
The actual appearance of the Page Setup depends on the application you
are using. For more information, see the documentation that comes with
the Macintosh.
D
From the [Paper:] box, select the paper size.
E
Make desired settings, and then click [OK].
- - - -Small Size Print Area
This printer supports printing on print areas such as “A4 Small” and “Letter
Small” when printing from a Macintosh only with specific versions of the driver.
The LaserWriter 8.4x (or later) driver supports printing on both standard and
small print areas. However, with LaserWriter 8.3x (or earlier), the small print
area options are not displayed.
With LaserWriter 8.3x (or earlier), select A4, for example, and click [Options] in
the [Page Setup] dialog box, then use the [Larger Print Area] option. Checking [Larg-
er Print Area]
produces the same printing result as LaserWriter 8.4x (or later) stan-
dard A4 print area. Unchecking the [Larger Print Area] produces the same result
as the LaserWriter 8.4x (or later) “A4 Small” print area.
Setting up for printing from an application
A
Open the file you want to print.
B
On the [File] menu, click [Print].
The Printer Settings appear.