Lanier AP206 - Manual (Page 74)

Cleaning and Adjusting the Printer
61
4
Cleaning and Adjusting the Printer
Cleaning the Charge Wire
The charge wire requires cleaning
when printouts appear dirty.
R CAUTION:
A
Press the printer's power switch
to turn off the power.
B
Open the front cover and the top
cover.
Note
❒ If the printer is equipped with
the paper feed unit (optional)
and the duplex unit (optional),
first open the upper portion of
the duplex unit, and then open
the top cover of the printer.
C
Raise the green lock levers to a
vertical position.
D
Hold the inset grip of the photo-
conductor unit, pull it straight up,
and remove it from the printer.
Important
❒ Exposing the photoconductor
unit to light for too long can re-
duce its performance. Clean the
charge wire as quickly as possi-
ble.
• When accessing the inside of
the machine, do not touch any
sections other than those
specified in this manual. If you
do, it might result in receiving
a burn or injury.
• Do not open the front cover
when the paper tray is pulled
out halfway. If you do, it might
cause a personal injury.
ZDGH110J
ZDGH120J
ZDGH130J