Lanier AP206 - Manual (Page 110)

Interpreting the Configuration Page
97
5
Error Log
This is a log of printer errors.
Interpreting the Configuration Page/RICOH-SCRIPT2
❖ ❖ ❖ ❖ Reference
Shows the printer system version and so on. You can also see the status of the
paper tray.
❖ ❖ ❖ ❖ Tray Status
Shows the status of the paper trays.
If you install the paper feed unit, it is described as “Tray2”.
If "FRE" is indicated for Tray 1, it means "Custom Size" is set for Tray 1.
❖ ❖ ❖ ❖ RPS2 Status
Shows the current settings for the RPS2 mode.
❖ ❖ ❖ ❖ Memory Status
Shows the amount of printer memory, VM area and so on.
Reference
For more information about printer memory and VM area, see the “Oper-
ating Instructions” for RICOH-SCRIPT2 included as a PDF file on the CD-
ROM.
❖ ❖ ❖ ❖ Font Status
This is not used for this printer.
❖ ❖ ❖ ❖ Installed Fonts
Shows the fonts installed on the printer.
❖ ❖ ❖ ❖ Interface Status
Shows that the Network Interface Board is installed.
❖ ❖ ❖ ❖ Network & TCP/IP Status
Shows the network and TCP/IP items and their settings.
❖ ❖ ❖ ❖ Netware Status
Shows the NetWare items and their settings.
❖ ❖ ❖ ❖ NetBEUI Status
Shows the NetBEUI items and their settings.
❖ ❖ ❖ ❖ AppleTalk Status
Shows the AppleTalk items and their settings.