Lanier AP206 - Manual (Page 99)

Using the Operation Panel
86
5
Menu Settings
IPDL-C Menu
The following are the settings you can make with “IPDL-C Menu”.
Note
❒ Italicized settings indicate default settings.
❖ ❖ ❖ ❖ 1. Job Timeout
You can set how many seconds the printer waits before terminating a print
job when the printer does not receive the end of the print job. Setting “000
Off” turns off job timeout.
• 000 Off
• 1 to 999 seconds by 1
❖ ❖ ❖ ❖ 2. I/O Timeout
You can set how many seconds the printer waits for more print data before
ending its waiting period and terminating a job. Setting “000 Off” turns off I/
O timeout.
• 000 Off
• 1 to 999 seconds by 1 (999 seconds)
RPS2 Menu
The following are the settings you can make with “RPS2 Menu”. The settings
made with the printer driver normally take priority, except when a printer driv-
er setting is set to use the printer's settings.
Note
❒ Italicized settings indicate default settings.
❖ ❖ ❖ ❖ 1.Resolution
You can select the resolution and the number of colors used per dot.
• 600 dpi, 1 bit
The printer prints in 600 dpi, with two-valued dots.
• 600 dpi, 2 bit
The printer prints in 600 dpi, with multi-valued dots.
• 300 dpi, 1 bit
The printer prints in 300 dpi, with two-valued dots.
❖ ❖ ❖ ❖ 2.Color Mode
You can select either monochrome or color printing.
• Color
• Black & White