Lanier AP206 User Manual
Page 105
Using the Operation Panel
92
5
❖
❖
❖
❖ 8. Bi-direction
You can select the printer response mode for status fetch requests when the
standard parallel interface is being used. Use the "Standard" setting when you
are experiencing problems while the printer is connected to another manufac-
turer's print box.
• Original Mode
• Standard
❖
❖
❖
❖ 9. PrinterLang.
You can select the printer language that is automatically set when the printer
is turned on.
• IPDL-C
• RPS
❖
❖
❖
❖ 10. Language
You can select the language of the text that appears on the panel display.
• English
• French
• German
• Italian
• Dutch
• Spanish
• Japanese
❖
❖
❖
❖ 32. IP Address – 39. Active PTL.
These items appear when the optional Network Interface Board is installed in
the printer.
Reference
⇒ the "Setup Guide" that comes with the printer