Lanier AP206 - Manual (Page 50)

Error & Status Messages
37
4
Check Tray2
Connection
The paper feed unit (option) is
not installed correctly. Install the paper feed unit
correctly.
⇒ the "Setup
Guide" that comes with the
printer
Chg. Cleaner The fuser cleaner is dirty. You can print about 1,000
more pages after this mes-
sage is displayed.
Close Duplex
Uint Cover *1
The duplex unit cover is open. Close the duplex unit cover.
Close Front Cover The front cover is open. Close the front cover. ⇒ the
"Setup Guide" that comes
with the printer
Close Rear Cover The rear cover is open. Close the rear cover.
Close Top Cover The top cover is open. Close the top cover.
Energy Saver In the Energy Saver mode. Press the operation key or
send a job from the comput-
er to turn the power on.
Load
(paper size)
There is no paper of the indicat-
ed size in the paper tray being
used. Load the indicated paper
size into the paper tray be-
ing used.
⇒ P.29 “Loading
Paper”
There is no paper of the correct
size loaded in the paper tray. Load the correct size paper.
Low on: xxx The toner indicated by xxx is
low. Replace the indicated toner
cartridge. The color of the
toner is shown by the
CMYK color model. The
meaning is following.
• C: cyan
• M: magenta
• Y: yellow
• K: black
⇒ P.66 “Replacing the Toner
Cartridge”
Open and Close
Front Cover The front cover is not closed
correctly. Open the front cover and
close it correctly until it is
locked into place.
Open DuplexCover
Remove Misfeed *1
There is a paper misfed in the
duplex unit. Remove the misfed paper.
⇒ P.59 “When the Message
"Open DuplexCover Remove
Misfeed" Appears”
Message Description Comments