Lanier AP206 - Manual (Page 85)

Troubleshooting
72
4
Replacing the Fuser Oil Bottle
and Ozone Filter
Replace the oil bottle and ozone filter
whenever the following messages ap-
pear on the panel display.
IPDL-C
Add FuserOil
Add Fuser Oil
The Fuser Oil Type204 includes a fus-
er oil bottle and ozone filter.
R WARNING:
R CAUTION:
Important
❒ Disposal can take place at our au-
thorized dealer or at appropriate
collection sites.
❒ Dispose of used ozone filters as
general burnable refuse.
A
Slide the top cover open lever to-
wards the front of the printer, and
open the top cover.
Note
❒ If the printer is equipped with
the paper feed unit (optional)
and the duplex unit (optional),
first open the upper portion of
the duplex unit, and then open
the top cover of the printer.
B
Rotate the lock levers to release
the bottle, and then remove the
oil bottle from the printer.
• Do not incinerate the oil bottle.
This action could cause a fire
or getting burned.
• Spilt oil is very slippery. If oil
is spilt, wipe it with alkaline
cleaner. Otherwise, the oily
surfaces can create the dan-
ger of slipping and personal
injury.
• When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
ZDGH100J
ZDGH170J