Deleting the user code record, Log protect> j off l, Menu> j ipdl-c menu l – Lanier AP206 User Manual
Page 119: Menu> j maintenance l, Maintenance> j 1.toner level l
Using the Operation Panel
106
5
E
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to select “On” or “Off”, and then press {{{{#Enter}}}}.
<Log Protect> j
Off l
This registers the setting and returns to the “Maintenance” menu.
F
Press
{{{{On Line}}}}.
The "Ready" message appears on the panel display.
Deleting the User Code Record
This procedure describes how to clear the User Code record.
Note
❒ If “Log Protect" is set to "On", you can not delete the User Code record. Select
"Off" in “Log Protect", and then follow the procedure below.
⇒ P.105 “Protect-
ing the User Code Record”
A
Check if the On Line indicator stays on. If not, press
{{{{On Line}}}}.
B
Press
{{{{Menu}}}}.
The following message appears on the panel display.
<Menu> j
IPDL-C Menu l
C
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display "Maintenance", and then press {{{{#Enter}}}}.
<Menu> j
Maintenance l
The following message appears on the panel display.
<Maintenance> j
1.Toner Level l
Power
On Line
Data In
Reset
Escape
Menu
Media
Enter
Error
ZDHS031E