Lanier AP206 User Manual
Page 93
Using the Operation Panel
80
5
B
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display the screen for the setting you want to change,
and then press
{{{{#Enter}}}}.
<Menu> j
System Menu l
The following message appears on the panel display.
<System Menu> j
1.Paper Tray l
C
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display the screen for the menu item you want to
change, and then press
{{{{#Enter}}}}.
<System Menu> j
2.I/O Buffer l
An asterisk (“*”) is indicated at the left side of the currently selected item.
<I/O Buffer> j
*128KB l
D
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display the screen for the setting you want to change,
and then press
{{{{#Enter}}}}.
<I/O Buffer> j
1024KB l
This registers the setting.
E
Repeat steps
CCCC and DDDD to change other settings.
F
Press
{{{{On Line}}}}.
The following message appears on the panel display.
Take Offline
Then Press Reset
G
Press
{{{{On Line}}}}.
The On Line indicator stays off and the printer enters offline.
H
Press
{{{{Reset}}}}.
This restarts the printer with the new settings.
Note
❒ You can check the current menu settings by printing a configuration page.
⇒ P.95 “Printing the Configuration Page”