Lanier AP206 - Manual (Page 48)

35
4. Troubleshooting
Error & Status Messages
There are three types of error and status messages.
• Printed error messages
• Error and status messages on the operation panel
• Printer information received from the network
Printed Error Messages
The error message shown below is printed by the printer whenever there is not
enough memory to print data.
Error message Required action
There is not enough memory in your printer to
print this page.Change print quality in the
printer driver and try again.For details, please
refer to the troubleshooting section in your
manual. The following are the actions you should take
when you encounter memory shortage prob-
lems. If these actions do not solve the problem
individually, try them in combination with
each other.
⇒ P.114 “Low Memory”
A Increase printer memory.
Install the optional memory unit to in-
crease the amount of printer memory.
B Reduce resolution.
Use the printer driver to set resolution to
300 dpi.
⇒Help of the printer driver
⇒”RICOH-SCRIPT2 Operating Instruc-
tions”
C Turn on “Image Memory”.
Use the printer's “System Menu” to turn on
“Image Memory”.
⇒ P.90 “System Menu”