Lanier AP206 - Manual (Page 42)

Loading Paper
29
3
Loading Paper
Loading Paper in the Paper
Tray
This section describes instructions for
loading paper in the standard paper
tray and the Paper Cassette Type204
(option).
R CAUTION:
Reference
For more information about the
size and feed direction of paper
that can be loaded in the tray, see
P.21 “Paper and Other Media Sup-
ported by This Printer”.
Note
❒ Custom size paper is supported by
the standard tray or the Paper Cas-
sette Type204 (option) only. (Both
are referred to as Tray 1.)
A
Carefully pull the paper tray out
of the printer and place it on a flat
surface.
B
Slide the paper guides to posi-
tions that match the size of paper
you want to load.
C
Load paper into the tray with the
side to be printed facing up.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
(
T) inside the tray.
• The paper tray does not have a
stopper. When pulling it out, be
careful not to pull it strongly. If
you do, the tray might fall and
cause a personal injury.
ZDGY010J
ZDGY020J
ZDGY030J
ZDGY040J