Installing a pci card – Lenovo 6532 User Manual
Page 140
Installing a PCI card
To install a PCI card, complete the following steps:
1. Read the safety information in “Important Safety Information” on page 1 and “Guidelines for trained
service technicians” on page 115.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables; then,
remove the server cover (see “Removing and installing the cover” on page 119).
3. If you have installed an optional PCI-X riser-card assembly
2
, disconnect the riser-card power cable
1
from the riser-card assembly.
00
00
00
00000000
00000000
00000000
00000000
1
Expansion-slot cover
5
PCI card
2
Expansion slot 2
6
Guide channels
3
Expansion slot 1
7
Riser-card assembly
4
Expansion-slot cover
8
PCI card
4. Grasp the riser card at the front grip point and rear edges; then, lift to remove the riser-card assembly.
Place the riser-card assembly
7
on a flat, static-protective surface.
5. Remove the expansion-slot cover on the slot that you intend to use.
132
Hardware Maintenance Manual