Lenovo 6532 - Manual (Page 176)

7. Disconnect the riser-card power cable from the PCI-X riser card.
8. If you are instructed to return the PCI-X riser-card power cable, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Installing the PCI-X riser-card power cable
To install the replacement PCI-X riser-card power cable, complete the following steps.
1. Connect the riser-card power cable to the PCI-X riser-card assembly.
2. Install the adapter in the riser-card assembly (see “Installing a PCI card” on page 132).
3. Install the riser-card assembly (see “Installing the riser-card assembly” on page 157).
4. Go to “Completing the FRU replacement” on page 172.
Updating the Universal Unique Identifier (UUID)
The Universal Unique Identifier (UUID) must be updated when the system board is replaced. Use the
Advanced Settings Utility to update the UUID in the UEFI-based server. The ASU is an online tool that
supports several operating systems. Make sure that you download the version for your operating system. To
download the ASU and update the UUID, complete the following steps:
1. Download the Advanced Settings Utility (ASU):
a. Go to http://www.lenovo.com/support.
b. Enter your product number (machine type and model number) or select Servers and Storage from
the Select your product list.
c. From Family list, select ThinkServer RS210;, and click Continue.
d. Click Downloads and drivers to link to the ASU program.
2. ASU sets the UUID in the Integrated Management Module (IMM). Select one of the following methods to
access the Integrated Management Module (IMM) to set the UUID:
• Online from the target system (LAN or keyboard console style (KCS) access)
• Remote access to the target system (LAN based)
168 Hardware Maintenance Manual