Lenovo 6532 - Manual (Page 159)

Microprocessor
Heatsink Orientation DIMMs DIMMs
a. Use a fingernail to press the top of the battery clip away from the battery. The battery pops up
when released.
b. Use your thumb and index finger to lift the battery from the socket.
6. Dispose of the battery as required by local ordinances or regulations. See “Battery return program” on
page 225 for more information.
Installing the battery
The following notes describe information that you must consider when replacing the system-board battery in
the server.
• When replacing the system-board battery, you must replace it with a lithium battery of the same type
from the same manufacturer.
• After you replace the system-board battery, you must reconfigure the server and reset the system date
and time.
• To avoid possible danger, read and follow the following safety statement.
Statement 2
CAUTION:
When replacing the lithium battery, use only an equivalent type battery recommended by the
Chapter 6 . Replacing FRUs 151